MODEL E45

FOR FACE NAILING SIDING, STEEL-TO-STEEL AND GYPSUM WALL BOARD FASTENING SYSTEM Using sheet plastic collation, this system eliminates plastic residue from under the head of driven pins for a clean installation. The tool operates at a maximum air pressure of 120 psi and has the power to attach fiber cement siding to steel as thick as 97 mil (12 GA). Reduce the air pressure and adjust the overdrive knob and the tool accurately attaches wallboard to steel as thin as 20 GA. The Model E45 handles pins 1" long to 2 1/2" long. For face nailing fiber cement siding, use AKN-100-XXXXHA pins. For fastening interior wall board, use ADW-100 pins. For select steel-to-steel applications of up to two layers of 54 mil (16 GA.) with rigid bracing use ASK-100-XXXXH pins. This versatile tool can also be used for special applications requiring wire collated pins or stainless steel pins.

MODEL E45

Questions? Contact us

800-248-2376

Advantages

  • Broad Range
  • Excellent Service
  • Top Sales Team
Specifications

Additional Information

Tool Characteristics

Collation Angle15˚
Fastener Type15° Coil, AKN-100-XXXXHA, ADW-100 & ASK-100-XXXXH Pins
Magazine Capacity250 pins
Fastener Length
1 - 2 1/2"
25 - 65 mm
Height
11 7/8"
302 mm
Width
5 1/8"
130 mm
Length
11 1/16"
281 mm
Weight
6 lbs
2.7 kg
Pressure
70 - 120 psi
5 - 8 bar
SCF per Cycle0.052 SCF performance at 100 psi (6.9 bar) / 1,47L performance at 7 bar
LubricantNon-detergent pneumatic tool lubricant
Actuation Systemsequential fire
Loadingcoil