STEEL FRAMING PINS AKN-100-XXXXHA

The STEEL FRAMING PINS AKN-100-XXXXHA series pins are designed specially for the ROCKFAST® E45 tool to attach plywood, oriented strand board (OSB) and fiber cement siding and soffit to cold formed steel from 97 mil (12 GA.) to 27 mil (22 GA.). These pins are finished with Aericote® 1000 coating which provides ten times the corrosion protection of electroplated zinc. When driven, the fastener separates completely from the sheet plastic collation leaving a clean fastening, especially important when face nailing siding. Refer to IAPMO UES ER-335 for design values for horizontal diaphragm and shear wall construction. See ICC Reports ESR-2290 and ESR-1844 for design values for use face nailing James Hardie fiber cement siding. See ICC Report ESR-2273 for design values for use fastening James Hardie fiber cement soffit. Contact us for details

PART NO. AKN-100-0100HA 1", AKN-100-0150HA 1-1/2"; AKN-100-0200HA 2"; AKN-100-0250HA 2-1/2"

Standards & Codes

ESR-1844
ESR-2273
ESR-2290
IAPMO ER-335

STEEL FRAMING PINS AKN-100-XXXXHA

Questions? Contact us

800-248-2376

Advantages

  • Broad Range
  • Excellent Service
  • Top Sales Team
Specifications

Additional Information

Pin Characteristics

Collation Typeplastic sheet coil
Head Diameter0.300" (7.6 mm)
Nail Diameter
.100"
2.54 mm
Length
1 1/2", 2", 2-1/2"
FinishAericote® 1000
Materialhigh carbon steel, heat treated
Nail HeadFull Round Head
Shank Typesknurled
Coil Capacity250 pins
ToolsE45
Standard / CodesESR-1844, ESR-2273, ESR-2290, IAPMO ER-335

Packing Information

Quantity per Case2,000 (AKN-100-0250HA 2,000)
Standards and Codes

ESR-1844

This report recognizes the use of ET&F pneumatic fasteners used to attach fiber cement HardiePanel® siding, manufactured by the James Hardie Building Products, to light gauge steel framing.

ESR-2273

This report recognizes the use of ET&F pneumatic fasteners used to attach fiber cement Hardiesoffit® Vented Plus™ manufactured by James Hardie Building Products to light gauge steel framing

ESR-2290

This report recognizes the use of ET&F® pneumatic fasteners used to attach fiber cement HardiePlank® siding, manufactured by the James Hardie Building Products, to light gauge steel framing and to concrete masonry un

IAPMO ER-335

This evaluation report recognizes ET&F pneumatic pins used to attach wood structural panel sheathing to cold formed steel framing of 20 GA. to 10 GA. thickness for horizontal diaphragm construction. Withdrawal and lateral strength design values are also provided for individual pins.