STRIP COLLATED PINS ASM-144

STRIP COLLATED PINS ASM-144 PINS The smooth shank ASM-144 series pins are commonly used to fasten to concrete or masonry substrates. Hardwood flooring installers use these pins to attach plywood, oriented strand board (OSB) underlayment or wood furring strips to concrete. Siding contractors use these pins to attach fiber cement siding to concrete or masonry walls. Pin length should be selected such that the pin penetrates at least 3/4" into the concrete or masonry. Pins are supplied collated with tape (25 pins/strip) or plastic (30 pins/strip) media for use in the Aerico® 90 tool. See ICC Reports ESR-2290 for design values for attaching James Hardie fiber cement siding to masonry.

Standards & Codes

ESR-2290

STRIP COLLATED PINS ASM-144

Questions? Contact us

800-248-2376

Advantages

  • Broad Range
  • Excellent Service
  • Top Sales Team
Specifications

Additional Information

Pin Characteristics

Head Diameter0.300" (7.6 mm)
Nail Diameter
.140"
3,60 mm
Length
1 1/4”, 1 1/2”, 2”, 2 1/4”
FinishMechanical Galvanized
Materialhigh carbon steel, heat treated
Shank Typessmooth
Strip Capacity25 pins
ToolsMODEL 90
Technical ReportsESR-2290

Packing Information

Quantity per Case3,750 (ASM-144-0125P, ASM-144-0150P, ASM-144-0175P, ASM-144-0200P); 2,500 (ASM-144-0225P); 5,600 (ASM-144-0125C); 4,800 (ASM-144-0150C)
Standards and Codes
ESR-2290

This report recognizes the use of ET&F pneumatic fasteners used to attach fiber cement HardiePlank® siding, manufactured by the James Hardie Building Products, to light gauge steel framing and to concrete masonry units.