PANELFAST® PINS AGS-100-XXXXNA

PANELFAST® PINS AGS-100-XXXXNA

The nominal 5/16 head of the PANELFAST® AGS-100 series pins are perfect for attaching plywood, oriented strand board (OBS), exterior gypsum sheathing and fiber cement boards to steel framing 68mil (14ga) and lighter. Designed for use with the Model 510 tool, the ballistic point and knurled shank combine to produce maximum holding strength. Like all ET&F .100 pins, these fasteners have Aericote® 1000 coating, which provides 1000 hour salt spray corrosion protection. See ICC Report ESR-2398 for design values for attaching gypsum sheathing, DensGlass® Gold and Fiberock® to cold formed steel. See ICC Report ESR-2290 for design values for use with James Hardie fiber cement siding. Refer to IAPMO UES ER-335 for design values for wood based panels used as horizontal diaphragms and shear walls with wind loads. Refer to ICC Report ESR-1777 for design values for shear walls with seismic loading.

PART NO. AGS-100-0150NA 1-1/2"; AGS-100-0200NA 2"; AGS-100-0250NA 2-1/2"

Standards & Codes

ESR-1777
ESR-2290
ESR-2398
IAPMO ER-335

Collated Pins

PANELFAST® PINS AGS-100-XXXXNA

    Questions? Contact us

    800-248-2376

    Advantages

    • Broad Range
    • Excellent Service
    • Top Sales Team
    Specifications

    Additional Information

    Pin Characteristics

    Collation Typeplastic rope coil
    Head Diameter5/16 (8 mm)
    Nail Diameter
    .100"
    2.54 mm
    Length
    1 1/2", 2", 2-1/2"
    38 mm
    FinishAericote® 1000
    Materialhigh carbon steel, heat treated
    Shank Typesknurled
    Coil Capacity250 pins
    ToolsPANELFAST® MODEL 510
    Standard / CodesESR-1777, ESR-2290, ESR-2398, IAPMO ER-335

    Packing Information

    Quantity per Case3,000
    Standards and Codes

    ESR-1777

    This evaluation report recognizes the use of ET&F AGS series pins for use attaching wood panel sheathing to cold formed steel for use in shear wall assemblies used to resist seismic loads.

    ESR-2290

    This report recognizes the use of ET&F® pneumatic fasteners used to attach fiber cement HardiePlank® siding, manufactured by the James Hardie Building Products, to light gauge steel framing and to concrete masonry un

    ESR-2398

    Gypsum sheathing, Dens-Glass® Gold gypsum board, or fiber-reinforced gypsum panels such as Fiberock® brand sheathing are attached to steel framing members using ET&F Panelfast® knurled AGS-100 series pneumatic fasteners.

    IAPMO ER-335

    This evaluation report recognizes ET&F pneumatic pins used to attach wood structural panel sheathing to cold formed steel framing of 20 GA. to 10 GA. thickness for horizontal diaphragm construction. Withdrawal and lateral strength design values are also provided for individual pins.