STEEL FRAMING PINS AKN-100-XXXXNA
The STEEL FRAMING PINS AKN-100-XXXXNA series pins are designed specially for the 500 tool to attach plywood and oriented strand board (OSB) to light gauge steel from 68 mil (14 GA.) to 27 mil (22 GA.). These pins are finished with Aericote® 1000 coating which provides ten times the corrosion protection of electroplated zinc. Unlike wire collation, the plastic coil collation eliminates finish burn-through which initiates corrosion. Refer to IAPMO UES ER-335 for design values for horizontal diaphragm and shear wall construction.
PART NO. AKN-100-0150NA 1-1/2"; AKN-100-0200NA 2"; AKN-100-0250NA 2-1/2"STUCCOFAST® PINS & WASHERS Stuccofast® pins and washers were developed to securely fasten stucco lath and insulation to light gauge steel. AKN-100 series pins and galvanized steel or plastic washers are supplied in combination for use with the ET&F Model 500 tool. Multiple pin lengths provide fastening solutions for most popular insulation thicknesses. Other washer styles are available upon request.Standards & Codes
Collated Pins
STEEL FRAMING PINS AKN-100-XXXXNA
• Wood sheathing and wood structural panel diaphragms to steel framing (IAPMO ES ER-335)
• Wood nailers to steel track or steel studs
• Stucco lath to steel framing (requires washer)
• Rigid foam insulation to steel framing (requires washer)
Questions? Contact us
Advantages
- Broad Range
- Excellent Service
- Top Sales Team
Related Products
- Specifications
Additional Information
Pin Characteristics
Collation Type plastic rope coil Head Diameter 1/4" (6 mm) Nail Diameter .100"2.54 mmLength 1 1/2", 2", 2-1/2"Finish Aericote® 1000 Material high carbon steel, heat treated Nail Head Full Round Head Shank Types knurled Coil Capacity 300 pins Tools 500 Technical Reports ESR-1844, ESR-2290, IAPMO ER-335 Packing Information
Quantity per Case 3,600 (AKN-100-0250NA 3,600) - Standards and Codes
This report recognizes the use of ET&F pneumatic fasteners used to attach fiber cement HardiePanel® siding, manufactured by the James Hardie Building Products, to light gauge steel framing.
This report recognizes the use of ET&F pneumatic fasteners used to attach fiber cement HardiePlank® siding, manufactured by the James Hardie Building Products, to light gauge steel framing and to concrete masonry units.
This evaluation report recognizes ET&F pneumatic pins used to attach wood structural panel sheathing to cold formed steel framing of 20 GA. to 10 GA. thickness for horizontal diaphragm construction. Withdrawal and lateral strength design values are also provided for individual pins.
MODEL E45
15°, 2 1/2" (65 mm), Coil Nailer, 22 - 12 GA.