STEEL FRAMING MODEL 500
FOR WOOD TO STEEL FASTENING The Model 500 tool is designed specifically for cold formed steel construction, and has earned a reputation as the most reliable tool on the market today. Weighing only 6 pounds, this bumpfire tool is three to five times faster than traditional screw guns. The tool accepts fasteners 1 1/2” to 2 1/2” long and operates using common air compressors at 120 psi maximum air pressure. Using our code approved, coil collated AKN-100 series pins, the Model 500 tool is used to fasten plywood shear walls and horizontal diaphragms to cold formed 27 mil (22 GA.) to 68 mil (14 GA.) steel. This system is also code approved for face nailing specific brands of fiber cement siding to cold formed steel studs.
STEEL FRAMING MODEL 500
Questions? Contact us
Advantages
- Broad Range
- Excellent Service
- Top Sales Team
- Specifications
Additional Information
Tool Characteristics
Collation Angle 21° Fastener Type 21° Coil., AKN-100 Pins Magazine Capacity 300 pins Fastener Length 1 1/2 - 2 1/2"38 - 65 mmHeight 10 1/2"267 mmWidth 4 1/2"114 mmLength 11"279 mmWeight 5.5 lbs2.5 kgPressure 90 - 120 psi6 - 8 barSCF per Cycle 0.052 SCF performance at 100 psi (6.9 bar) / 1,47L performance at 7 bar Lubricant Non-detergent pneumatic tool lubricant Actuation System contact actuation Loading coil