PANELFAST® MODEL 510
FOR WOOD, GYPSUM & CEMENT PANELS TO STEEL FASTENING SYSTEM The Model 510 Tool and Panelfast® AGS-100 pins comprise the Panelfast® system. The sequential fire Model 510 pneumatic tool has adjustable depth control that precisely places the pin at the desired depth in plywood, gypsum sheathing, Dens Glass Gold, Fiberock, fiber cement siding and even vinyl siding. One tool does it all! The exclusive design of the Model 510 tool drives the largest 0.100” headed pin on the market, providing maximum wind pressure resistance even in gypsum based sheathing materials. The tool accepts pins 1 1/2”, 2” and 2 1/2” in length and is designed for use with steel 27 mil (22 GA.) to 68 mil (14 GA.) thickness.
PANELFAST® MODEL 510
- Light weight and good balance
- Switchable trigger for single shot and bump fire
- Adjustable safety and depth regulation
Questions? Contact us
Advantages
- Broad Range
- Excellent Service
- Top Sales Team
- Specifications
Additional Information
Tool Characteristics
Collation Angle 21° Fastener Type 21° Coil., Panelfast® AGS-100 Pins Magazine Capacity 250 pins Fastener Length 1 1/2 - 2 1/2"38 - 65 mmHeight 10 1/2"267 mmWidth 4 1/2"114 mmLength 11"279 mmWeight 5.5 lbs2.5 kgPressure 90 - 120 psi6 - 8 barSCF per Cycle 0.052 SCF performance at 100 psi (6.9 bar) / 1,47L performance at 7 bar Lubricant Non-detergent pneumatic tool lubricant Actuation System sequential fire Loading coil