STUCCOFAST® SYSTEM MODEL 500M

STUCCOFAST® SYSTEM MODEL 500M

STUCCOFAST® SYSTEM FOR STUCCO LATH The system includes the Model 500M Tool with magnetic washer holder, ET&F coiled pins and pins and steel or plastic washers which capture and contain the wire lath. The sequential fire operation and adjustable overdrive control enable a perfect fastening with each pull of the trigger. Like all ET&F cold formed steel framing tools, the Model 500M pneumatic tool is powered by a standard air compressor operating at a maximum 120 psi air pressure. The fastest, safest, lowest cost, easiest way to attach stucco lath and insulation to cold formed steel framing.

Coil Nailers

STUCCOFAST® SYSTEM MODEL 500M

    Questions? Contact us

    800-248-2376

    Advantages

    • Broad Range
    • Excellent Service
    • Top Sales Team
    Specifications

    Additional Information

    Tool Characteristics

    Collation Angle21°
    Fastener Type21° Coil., AKN-100 Pins
    Magazine Capacity300 pins
    Fastener Length
    1 1/2 - 2 1/2"
    38 - 65 mm
    Height
    10 1/2"
    267 mm
    Width
    4 1/2"
    114 mm
    Length
    11"
    279 mm
    Weight
    5.5 lbs
    2.500 kg
    Pressure
    90 - 120 psi
    6.2 - 8 bar
    SCF per Cycle0.052 cu. Ft. at 100 psi (6.9 bar)
    LubricantNon-detergent pneumatic tool lubricant
    Actuation Systemsequential fire
    Loadingcoil
    Resources
    View File
    500A Handout
    View File
    Model 500M Schematic