STUCCOFAST® SYSTEM MODEL 500M

STUCCOFAST® SYSTEM FOR STUCCO LATH The system includes the Model 500M Tool with magnetic washer holder, ET&F coiled pins and pins and steel or plastic washers which capture and contain the wire lath. The sequential fire operation and adjustable overdrive control enable a perfect fastening with each pull of the trigger. Like all ET&F cold formed steel framing tools, the Model 500M pneumatic tool is powered by a standard air compressor operating at a maximum 120 psi air pressure. The fastest, safest, lowest cost, easiest way to attach stucco lath and insulation to cold formed steel framing.

Tools

STUCCOFAST® SYSTEM MODEL 500M

Questions? Contact us

800-248-2376

Advantages

  • Broad Range
  • Excellent Service
  • Top Sales Team
Specifications

Additional Information

Tool Characteristics

Collation Angle21°
Fastener Type21° Coil., AKN-100 Pins
Magazine Capacity300 pins
Fastener Length
1 1/2 - 2 1/2"
38 - 65 mm
Height
10 1/2"
267 mm
Width
4 1/2"
114 mm
Length
11"
279 mm
Weight
5.5 lbs
2.500 kg
Pressure
90 - 120 psi
6.2 - 8 bar
SCF per Cycle0.052 cu. Ft. at 100 psi (6.9 bar)
LubricantNon-detergent pneumatic tool lubricant
Actuation Systemsequential fire
Loadingcoil
Resources